| |
| BASE MODEL: EAGLE VA |
| Frame |
76" center of drawbar eye
to kingpin. Drawbar eye is rubber mounted
in a steel shock housing. Drawbar set for 34" hitch
height. |
| Paint |
Frame and fifth wheel are steel
shot blasted and treated with an eleven-stage
cathodic electro-depostion epoxy primer (E-Coat).
Top coat is baked, high quality Gray polyurethane
finish paint. |
| Fifth Wheel |
36" fabricated steel table
with cast steel center section. Roadside release
handle. Fifth wheel mounted directly over centerline
of axle. 48" unladen height. |
| Air System |
ABS relay, emergency, pressure
protection and check valves, SV-4 (anti-false
charging). Steel air reservoir. Air lines with
gladhands for connection to lead and 2nd trailer. |
| Axle |
Meritor 4671 round
with N-spindles, 22,500 lbs. rated capacity.
Cambered axle is installed to set toe-in at
1/16".
71 1⁄2" track for 96" wide
trailers. |
| Electrical System |
Lamps: Two 12 volt, rubber grommet
mounted 4" stop and tail lamps mounted on
rear frame.
Harness: Phillips ABS sealed modular harness
with rear trailer lead and replaceable
receptacle.
Light Cord: Heavy-duty 12' straight cable. |
| Hubs |
Cast steel hubs for ten stud disc
wheels and outboard mount cast iron brake drums. |
| Brakes |
16 1⁄2" x 7" Meritor
Q series, S-cam air brakes with Meritor MA-312
lining and Anti-Lock Brake System. TSE Type 30
service chambers with stroke indicators. Meritor
5 1/2" Automatic slack adjusters. |
| Tires |
(4) Goodyear Wingfoot APR 295/75R
22.5 steel radial 14 ply. |
| Suspension |
Seven leaf, two-stage springs
with rebound leaves. Transverse mounted over
axle. Spring eyes are secured in rubber bushings. |
| Wheels |
22.5" x 8.25" steel
disc wheels, 10 stud hub pilot mount. Pre-painted
white enamel. |
| MISCELLANEOUS |
| Handles |
Two oversized "powerzone" hinged
handles at drawbar sides. |
| Mud Flaps |
Black plastic flaps with Silver
Eagle logo, mounted on removable square bar,
coiled hangers. |
| Support Leg |
Steel stiff leg with replaceable
rubber footpad |
| Registration Holder |
Watertight Lexan document holder
mounted on frame. |
| Gladhand Holders |
Two pair, mounted to drawbar
crossmember. |
| License |
License plate mounting surface
on tail frame, pre-drilled for standard plate. |
| Counterweight |
Weighted tail frame to reduce
drawbar pickup weight and allow easier servicing. |
|
- This is the standard configuration for
the Eagle VA dolly. For options, click here.
Automatically receive the latest information
on Silver Eagle dollies - click
here to sign up.
|
 |
